|
Installation Requirements
The
rare earth magnets used on the motors do not require
a keeper and the rotor may be assembled or disassembled
at will with no loss of performance. The rotors,
however, contain very strong magnets, which can
easily attract themselves to a foreign magnetic
material or vice versa. Therefore, care should
be exercised in handling these rotors during the
installation process. Installation fixtures are
recommended. The motors using Alnico magnets do
require a keeper or the motor’s performance
will decrease by approximately 50%. The rotors
should not be disassembled from the stator without
such a keeper.
The stators are intended to
be mounted inside of a smooth cylindrical housing
on the host equipment. Individual mounting flanges
can be manufactured and installed at Aeroflex
if desirable. Fully housed motors with shaft extensions
are available.
The rotors have I.D.s as specified
in the catalogue. These can be mounted onto the
customer’s hub as needed. Individual side
plates can be added or custom hubs can be machined
to customer requirements.
BACK
| NEXT
For
more information, contact: |
| |
 |
Phone: |
(631) 231-9100 |
|
Fax: |
(631) 231-8375 |
|
E-mail: |
|
| |
|
Limited
Angle Torque Motors/Tachometers
